Drilling plan for soft starter installation
When drilling mounting holes in a cabinet, take caution not to allow chips and other foreign matter to enter the soft starter.
Figure 12 through Figure 18 below shows the drilling plan for mounting the MEsoftstart soft starter in a cabinet or against a
wall.
MEsoftstart/I00 and MEsoftstart/I01 Drilling plan
Figure 12 – Drilling plan: MEsoftstart/I00 with and without
bypass contactor and MEsoftstart/I01 without bypass
contactor
MEsoftstart/I02 Drilling plan
Figure 14 – Drilling plan: MEsoftstart/I02 without bypass
contactor
30 Installation Instructions
Figure 13 – Drilling plan: MEsoftstart/I01 with bypass contactor
Figure 15 – Drilling plan: MEsoftstart/I02 with bypass contactor