Unit Dimensions - Quantech 3070TSE Manual

FORM QTC3-EG6 (1118)

Unit Dimensions

2242 [88.3]
FRAME WIDTH
2254 [88.8]
OVERALL WIDTH
NOTE:
Placement on a level surface of free of obstructions (including snow, for winter operation) or air circulation ensures rated performance, reli-
able operation, and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable
airflow patterns and possible diminished performance. The unit controls will optimize operation without nuisance high-pressure safety cut-
outs; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is
no higher than on spring isolators. Recommended minimum clearances: Side to wall – 6'; rear to wall – 6'; control panel to end wall – 4'0'';
top – no obstructions allowed; distance between adjacent units – 10'. No more than one adjacent wall may be higher than the unit.
26
QTC3055THE, QTC3060THE, QTC3079THE
DISCONNECT SWITCH
(OPTIONAL)
51 [2.0]
333 [13.1]
1678 [66.1]
1117 [44.0]
3" VICTAULIC
16 [5/8"]
MOUNTING
HOLES TYP
1884 [74.2]
442 [17.4] 442 [17.4]
2180 [85.8]
WATER CONNECTIONS
2627 [103.4]
OVERALL LENGTH
035-24059-001 REV-E
POWER ENTRY
330.2 [13.00] WIDE X 177.8 [7.00] HIGH
1177 [46.4]
CONTROL PANEL BOTTOM DETAIL
INLET
269 [10.6]
WATER CONNECTION
36 [1.4]
MOUNTING
HOLES TYP
QUANTECH
36 [1.4]
MOUNTING
HOLES TYP
LD23531