Download  Print this page

Checking The Battery Voltage; Preparing A Bluetooth Device - Sony MEX-N5300BT Operating Instructions Manual

Fm/mw/lw cd bluetooth car audio.
Hide thumbs

Advertisement

Checking the Battery
Voltage
You can check the current battery voltage.
(Not available while the source is off and the
clock is displayed.)
1
Press DSPL repeatedly until the
battery voltage display appears.
Preparing a BLUETOOTH
Device
You can enjoy music, or perform handsfree
calling depending on the BLUETOOTH
compatible device such as a smartphone,
cellular phone and audio device (hereafter
"BLUETOOTH device" if not otherwise
specified). For details on connecting, refer to
the operating instructions supplied with the
device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound
may result.
Connecting with a Smartphone
using One-touch connection (NFC)
(MEX-N5300BT only)
By touching the control dial on the unit with
an NFC* compatible smartphone, the unit is
paired and connected with the smartphone
automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones
and IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated
location on NFC compatible devices.
For a smartphone with Android OS 4.0 or
lower installed, downloading the app "NFC
Easy Connect" available on Google Play is
required. The app may not be downloadable
in some countries/regions.
8
GB
1
Activate the NFC function on the
smartphone.
For details, refer to the operating
instructions supplied with the
smartphone.
2
Touch the N-Mark part of the unit
with the N-Mark part of the
smartphone.
Make sure that
of the unit.
To disconnect using NFC
Touch the N-Mark part of the unit with the
N-Mark part of the smartphone again.
Notes
• When making the connection, handle the
smartphone carefully to prevent scratches.
• One-touch connection is not possible when the
unit is already connected to two NFC compatible
devices. In this case, disconnect either device, and
make connection with the smartphone again.
Pairing and connecting with a
BLUETOOTH device
When connecting a BLUETOOTH device for
the first time, mutual registration (called
"pairing") is required. Pairing enables this
unit and other devices to recognize each
other. This unit can connect two BLUETOOTH
devices (two cellular phones, or a cellular
phone and an audio device).
1
Place the BLUETOOTH device within
1 m (3 ft) of this unit.
2
Press MENU, rotate the control dial to
select [BLUETOOTH], then press it.
3
Rotate the control dial to select [SET
PAIRING], then press it.
lights up on the display

Advertisement

Chapters

Table of Contents

This manual is also suitable for:

Mex-n4300bt

Comments to this Manuals

Symbols: 0
Latest comments: