Download  Print this page

Headlight Beam - Kawasaki VN900 2007 Owner's Manual

Hide thumbs

Advertisement

118
MAINTENANCE AND ADJUSTMENT

Headlight Beam

Horizontal Adjustment
The headlight beam is adjustable
horizontally. If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
Turn the horizontal adjusting screw
on the headlight rim in or out until the
beam points straight ahead.
A. Vertical Adjusting Screw
B. Horizontal Adjusting Screw
Vertical Adjustment
The headlight beam is adjustable ver-
tically. If adjusted too low, neither low
nor high beam will illuminate the road
far enough ahead. If adjusted too high,
the high beam will fail to illuminate the
road close ahead, and the low beam
will blind oncoming drivers.
Turn the vertical adjusting screw on
the headlight rim in or out to adjust
the headlight vertically.
NOTE
On high beam, the brightest point
should be slightly below horizontal
with the motorcycle on its wheels and
the rider seated. Adjust the headlight
to the proper angle according to local
regulations.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: