Led And Wiring Information - Honeywell LTE-X series Installation And Setup Manual

LED and Wiring Information

LED
REG
(green)
TX/RX
(yellow)
FAULT
(red)
SIGNAL
(green)
ALL IN UNISON FAST BLINK – Hardware Error.
IN SEQUENCE – Power Up sequence
ON Module is NOT registered with AlarmNet.
OFF Module is registered with AlarmNet.
FAST BLINK Download session with Compass in progress.
SLOW BLINK In unison with yellow LED – Registration in progress.
ON Message transmission pending.
QUICK
PERIODIC Normal
BLINK
FAST BLINK Message waiting for network ACK.
SLOW BLINK In unison with green LED – Registration in progress.
ON No contact with network.
OFF Normal.
SLOW BLINK Loss of communication with the panel (ECP fault).
FAST BLINK No network contact AND loss of communication with the
control panel.
ON Minimum required signal strength is present.
OFF Installation is not recommended.
DESCRIPTION