Setting Cooling Temperature - Electrolux EHE6879 User Manual

SETTING COOLING TEMPERATURES
NOTE: The recommended settings for a product
installed in a kitchen is 3˚C for the fresh food
compartment and -17˚C for the freezer.
.
IMPORTANT
If your product has food freezing in the fresh food
compartment, increase the temperature setting 1 or 2
degrees.
If you place food within 1 inch in front of the air ports,
there may be the chance of freezing food.
NOTE: Control features and alarms may vary by
model.
Alerts and Alarms
Door Open
If a door has been left open for 5 minutes or more, an
alarm will sound and the door open indicator will
illuminate on the display. The alarm can be turned off
by closing the door or pressing any key. Control panel
will return to normal operations after the door is closed.
Error tone
An alarm will sound if the user tries to make a selection
that is not available.
Automatic Ice & Water Dispenser
Using the ice maker after installation
Before making ice for the first time, be sure to prime
the water supply system. Air in new plumbing lines
can result in two or three empty ice maker cycles.
Furthermore, if the system is not flushed, the first ice
cubes may be discolored or have an odd flavor.
Refilling the water tank
• The water tank must be placed on the door.
• Pour potable water through the funnel at
the lid of water tank.
• Ensure that ice maker and dispenser is
switched on.
WATER
Refilling the water tank
Priming the water supply system
1. Begin filling the system by pressing and holding a
drinking glass against the dispenser.
2. Keep the glass in this position until water comes
out of the dispenser. It may take about 1½
minutes.
3. Continue dispensing water for about four minutes
to flush the system and plumbing connections of
any impurities (stopping to empty the glass as
necessary).
10 10