Transport, storage and packing
Working equipment
Fig. 14
Removing the cover
Opening the transport unit
12
Unpacking (III)
Required tools:
-
Screwdriver
-
Knife/scissors
-
Lifting equipment with lifting gear.
Note
Do not use the vacuum circuit-breaker if parts are broken, i.e. if you find cracks,
flaking, bent metal parts, damaged plug-in contacts, tears or bare cables.
Send it back in its original transport unit (see "Reusing the transport unit",
page 15).
•
Place the transport unit on a level, non-slip and pressure-resistant surface.
•
Remove lifting gear or transport means.
•
Unscrew all the screws from the cover and lift it off.
•
Remove partitions and store safely in the packaging for later attachment.
Fig. 15
Taking out the partitions
9229 9860 176 0E
2013-08-22