Silvercrest SEAS 60 A1 Operating Instructions Manual

Electric all-purpose sharpener

Advertisement

Quick Links

Electric All-Purpose Sharpener SEAS 60 A1
6
Electric All-Purpose Sharpener
Operating instructions
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: SEAS 60 A1-06/10-V3

Advertisement

Table of Contents
loading

Summary of Contents for Silvercrest SEAS 60 A1

  • Page 1 Electric All-Purpose Sharpener SEAS 60 A1 Electric All-Purpose Sharpener Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: SEAS 60 A1-06/10-V3...
  • Page 2 SEAS 60 A1...
  • Page 3: Table Of Contents

    Importer..........16 SEAS 60 A1...
  • Page 4: Introduction

    Information for these operating instructions These operating instructions are a component of the Electric All- Purpose Sharpener SEAS 60 A1 (henceforth designated as the appliance) and they supply you with important information for the intended use, safety and connection as well as operation of the appliance.
  • Page 5: Limited Liability

    A warning at this risk level indicates a threateningly dangerous situation. If the dangerous situation is not avoided it can lead to death or serious injuries. ► Follow the directives given in this warning to avoid the risks of death or personal injury to people. SEAS 60 A1...
  • Page 6 In this chapter you will receive important safety information regarding the handling of the appliance. This appliance complies with the statutory safety regulations. Incorrect usage can, however, lead to personal injury and property damage. SEAS 60 A1...
  • Page 7 Children should be supervised to ensure that they do not play with the appliance. SEAS 60 A1...
  • Page 8 Otherwise, there is a risk that the cable could be damaged! Risk of electric shock! ■ Ensure that the plug is at all times easily accessible, so that it can be quickly removed in the event of potential danger or risk. SEAS 60 A1...
  • Page 9: Operating Components

    Risk of Injury! Operating components 1 Grinder openings for knives with a smooth edge 2 Grinder openings for a fl at-head screwdriver 3 Grinder opening for a scissor edge 4 ON/OFF button 5 Dust drawer SEAS 60 A1...
  • Page 10: Setting Up And Connecting To The Power Supply

    Place the appliance on a fi rm, fl at, non-slip and level surface. Insert the plug into a mains power socket. This must be easily accessible, so that the plug can be quickly removed in the event of an emergency. SEAS 60 A1...
  • Page 11: Electrical Connection

    IMPORTANT ► Before you connect the appliance, compare the connection data (voltage and frequency) on the appliance plate with that of your electrical power supply. This data must match in order to avoid damage to the appliance. SEAS 60 A1...
  • Page 12: Sharpening

    (as alluded to in the shape of the opening). Sharpening at the false angle can destroy any blade. After sharpening, remove all grinding remnants that may be on the blade with a moist cloth. 1/ the 4 with your left thumb SEAS 60 A1...
  • Page 13: Knife With A Smooth Edge

    Now repeat the same step on the knife in the other grinder open- ing 1. Repeat steps 1-3 until the desired sharpness has been achieved. NOTE If you sharpen a knife with a short blade, only the front end of the blade is sharpened. SEAS 60 A1...
  • Page 14: Scissor Edge

    Reinsert it into the appropriate grinder opening 2 and apply a light pressure. The end face of the screwdriver will now be ground level and fl at. Check the result. If necessary, repeat steps 1 and 2. SEAS 60 A1...
  • Page 15: Cleaning

    Customer Services. ■ Wrap the power cable around the cable winder on the underside of the appliance for storage. ■ Store the appliance at a clean and dry location. SEAS 60 A1 5 from the appliance and empty it. Then...
  • Page 16: Disposal

    When the specifi ed C.O. Time has been reached, the appliance must be switched off until the motor has cooled itself down to room temperature (ca. 30 minutes). 230-240 V / ~ 50 Hz 60 W 3 Minutes SEAS 60 A1...
  • Page 17: Warranty And Service

    This applies also to replaced and repaired parts. Damages or defects discovered after purchase are to be reported directly after unpacking, at the latest two days after the purchase date. Repairs carried out after lapse of the warranty period are subject to charge. SEAS 60 A1...
  • Page 18: Importer

    Tel.: 0871 5000 700 e-mail: support.uk@kompernass.com Kompernass Service Ireland Tel: 1850 930 412 Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.com Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www.kompernass.com (£ 0.10 / minute) (0,082 EUR/Min.) SEAS 60 A1...

Table of Contents