Husqvarna 530iP4 Operator's Manual page 15

Maintenance
Make sure that the saw chain cover is not
damaged. Replace the saw chain cover if it is
damaged.
Make sure that the screws and nuts are tight.
Clean the oil tank cap
Make sure that the battery release buttons
on the battery works and locks the battery in
the product.
Examine that the battery charger is not dam-
aged and function correctly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not
damaged.
Examine all cables, couplings and connec-
tions. Make sure that there is no damage or
dirt.
Clean the saw chain cover.
Do a check of the connections between the
battery and the product. Do a check of the
connection between the battery and the bat-
tery charger.
Make sure that the saw head is not dam-
aged. Replace the saw head if it is damaged.
Examine the wear of the chain drive sprock-
et.
To examine the battery and the
battery charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To perform maintenance on the
attachment
To check the saw chain
Do a check of the saw chain daily.
783 - 001 - 12.11.2018
Daily
X
X
X
X
X
X
X
X
An approved Husqvarna dealer must do all servicing on the saw
Replace the chain drive sprocket after approximately 100 hours of
operation or more frequently if it is necessary.
1. Make sure that there are no cracks in rivets and
links.
2. Examine if the saw chain is rigid.
3. Compare the saw chain with a new saw chain to
examine if the rivets and links are worn.
4. Replace the saw chain if it exhibits any of the
conditions above.
Weekly Monthly
X
X
head.
X
15