Silvercrest KH 2218 Operation Manual page 8

Abbr. Diff. City
ROM 1
CAI 2
IST 2
MOW 3
KWI 3
DXB 4
KHI 5
DAC 6
BKK 7
SIN 8
HKG 8
PEK 8
TYO 9
SYD 10
NOU 11
AKL 12
3. Press the button SNOOZE f to switch
the daylight saving time for the selected
time zone either on or off . The display
indicates "SUM ON" resp. "SUM OFF"
accordingly.
4. If you have activated the summer daylight
saving time, it is automatically switched
off when the appliance receives an RDS-
Signal.
Programme World Time
1. Press the MODE button y once again.
In the display j the indicator for the city
signs blinks below the "WORLD CITY"
display.
2. Press the buttons UP/DOWN g/d to
set the desired world time. Pressing and
holding one of the buttons changes the
indicator faster. Also here, the above list-
ing of programmable cities and their time
difference is valid.
3. Press the SNOOZE button to switch the
summer daylight saving time either on or
off for the selected time zone. The display
indicates "SUM ON" resp. "SUM OFF"
accordingly.
Rome /Italy
Cairo /Egypt
Istanbul /Turkey
Moscow /Russia
Kuwait City/Kuwait
Dubai /Saudi Arabia
Karachi /Pakistan
Dacca /Bangladesh
Bangkok /Thailand
Singapore
Hong Kong
Beijing /China
Tokyo /Japan
Sydney /Australia
Noumea /
New Caledonia
Auckland /
New Zealand
Programme the reminder function
You can programme in up to 10 dates on
which the appliance can give you a reminder
when they arrive.
1. Press the MODE button y once again. In
the display j a date and the SDA 1 indi-
cator for the memory date 1 blinks.
2. Press the buttons UP/DOWN g/d to
programme in the first desired memory
date. Pressing and holding one of the but-
tons changes the indicator faster.
3. If you press the SNOOZE button f, the
year number will be deactivated and you
will thus receive a reminder on this date
every year.
4. Should you wish to programme in further
dates, press the Page button a to select a
memory slot from 2-10.
5. Proceed as above with further dates.
6. To deactivate the memory function, pro-
gramme in a date that lies in the past.
Programme the Update function
With this function the appliance can automat-
ically up-date the time by using RDS-Data.
1. Press the MODE button y once again.
The display j indicates "UPDATE ON".
2. Press the button DOWN g to deactivate
the up-date function. The display j then
shows "UPDATE OFF".
3. Press the button UP d to reactivate the
up-date function.
Programme time for the slumber
function
1. Press the MODE button y once again.
The display j indicates "SNOOZE 09".
2. Press the buttons DOWN/UP g/d to ad-
just the time span for the switch off timer
to between 01 and 59 minutes.
Selecting 12 or 24 hour time display
1. Press the MODE button y once again.
The display j indicates "24HR".
2. Press the button DOWN g to select the
12 hour modus. In the display j appears
"12HR".
- 6 -