General Cd Functions - Silvercrest BLUETOOTH KH 2376 Operating Instructions Manual

GB
Traffi c radio (TA - "Traffi c Announcement")

General CD functions

Anti-Shock function (ESP - "Electric Shock Protection")
Inserting and removing CDs
26
If no station is found that corresponds to this PTY identifi cation the notice NOT FND
appears briefl y and then the search ends with the last set station.
For this function the EON function must be switched on.
Press the TA button to switch this mode on or off .
In the TA mode the device will immediately switch from other stations or operation
modes to the radio station, which is currently broadcasting traffi c information. With
this the volume level entered under TAVOL will be set.
During the playback of traffi c radio press the TA button to stop the TA function
without switching off this function.
NOTICE
► Dampness and high humidity can cause the CD player to malfunction. In
this case switch on the vehicle heating to dissipate the dampness before
using the device. Do not subject the device to any extreemly high or low
temperatures.
The device is equipped with an anti shock function. This function serves to com-
pensate for vibrations, for example on uneven streets, and to provide an uninter-
rupted playback even with device movement. When the device is switched on the
memory automatically fi lls with data:
■ with audio CDs for 10 seconds;
■ with MP3-CDs for 120 seconds.
fold the face plate downward by pressing the face plate's unlocking device.
Push the CD into the CD slot with the inscribed side facing up.
Lock the face plate back into place by folding it upwards. Playback of the CD
begins. TOC READ appears in the display (Read directory contents).
To remove the CD open the face plate again. Press the OPEN button. The
CD will be ejected. The device switches to radio mode.
Handling and operation
Bluetooth Car Radio KH 2376