Download  Print this page

SIIG 04-0381A Quick Installation Manual

Hi-speed usb cardbus dual-m
Hide thumbs
   

Advertisement

Features and Benefits
Compliant with USB specifications revision 2.0
PC Card Interface with Power Management
Supports simultaneous operation of multiple high-
speed USB 2.0 and USB 1.1 devices
Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes
Includes a high quality switching power adapter to
provide standard power output for each port
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
System Requirements
PowerBook G3 or later with an available PC Card
slot
Mac OS 8.6 or later *
* Requires Mac OS X (version 10.1.3 or later) for USB
2.0 support
04-0381A
Hi-Speed USB
CardBus Dual-M

Quick Installation Guide

1

Advertisement

loading

  Related Manuals for SIIG 04-0381A

No related manuals

  Summary of Contents for SIIG 04-0381A

  • Page 1: Quick Installation Guide

    USB 2.0 host adapter or USB 2.0 hubs. System Requirements • PowerBook G3 or later with an available PC Card slot • Mac OS 8.6 or later * * Requires Mac OS X (version 10.1.3 or later) for USB 2.0 support 04-0381A...
  • Page 2: Package Contents

    Package Contents • Hi-Speed USB CardBus Dual-M • Switching power adapter • USB power cable • Driver CD • This quick installation guide Layout Power LED * Note: Some USB devices may require the Hi-Speed USB CardBus Dual-M to be powered. Please plug in either the Switching power adapter or the USB power cable if your device needs additional power.
  • Page 3: Hardware Installation

    Hardware Installation General instructions for installing the Cardbus are provided below, since the design of notebook computers may vary. Refer to your system’s reference manual for further information, if needed. Power off your notebook computer and any other connected peripheral devices. Insert the Cardbus into the CardBus Type II slot of your notebook computer with its 68-pin connector facing the slot.
  • Page 4 Double click v108.img, then double click the USB2EHCI_v108 disk icon that appears on the desktop. At the next window, double click USB2EHCI_v108 to start installation. At the Authorization window, click the lock icon, enter your administrator password, and click OK. Click Continue.
  • Page 5 Mac OS X (v10.2.8) or later Mac OS X (v10.2.8) or later have built-in driver support for this Cardbus. Just install the Cardbus and Mac OS will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Mac OS Driver Installation Mac OS 8.6, 9.x, X (v10.0-10.1) Since we didn't load any additional driver under...
  • Page 6 Mac OS X (v10.2.8) or later Since we didn't load any additional driver under these Mac OSs, the only way to verify the Cardbus works is actually connecting devices to the USB ports.
  • Page 7: Technical Support And Warranty

    SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton. You are responsible for the cost of shipping the product to SIIG • at the following address: SIIG, Inc.
  • Page 8 Hi-Speed USB CardBus Dual-M is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Mac and Mac OS are registered trademarks of Apple Corporation. Other names used in this publication are for identification only and may be trademarks of their respective companies.