1. Manuals
  2. Brands
  3. SIIG Manuals
  4. Storage
  5. Computer Drive
  6. Quick installation manual

SIIG Computer Drive Quick Installation Manual

Siig computer drive user manual
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Introducing the Hi-Speed USB 4-Port CardBus
The Hi-Speed USB 4-Port CardBus adds high-speed USB 2.0
interface to your notebook computer. A switching power
adapter is not required to provide standard power output
for each port. It supports high-speed (480 Mbps), full-
speed (12 Mbps), and low-speed (1.5 Mbps) data transfer
modes.
Key Features and Benefits
•
Compliant with USB specifications revision 2.0
•
PCMCIA Cardbus Interface with Power
Management
•
Supports simultaneous operation of multiple high-
speed USB 2.0 and USB 1.1 devices
•
Hot-swapping feature allows you to connect/
disconnect USB devices without first turning your
notebook computer off
•
Works with a various type of USB 2.0 and USB 1.1
devices
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host
adapter or USB 2.0 hubs.
04-0255F
Hi-Speed USB 4-Port Cardbus

Quick Installation Guide

1

Advertisement

Table of Contents
loading

Related Manuals for SIIG Computer Drive

Summary of Contents for SIIG Computer Drive

  • Page 1: Quick Installation Guide

    Hi-Speed USB 4-Port Cardbus Quick Installation Guide Introducing the Hi-Speed USB 4-Port CardBus The Hi-Speed USB 4-Port CardBus adds high-speed USB 2.0 interface to your notebook computer. A switching power adapter is not required to provide standard power output for each port. It supports high-speed (480 Mbps), full- speed (12 Mbps), and low-speed (1.5 Mbps) data transfer modes.

  • Page 2: System Requirements

    USB devices require extra power output from the ports, this power adapter can be purchased directly through SIIG at www.SIIG.com, part # AC-X00279. Important: When using the optional power adapter make sure to plug it into the CardBus before installing into your notebook computer.
  • Page 3 Connect the optional switching power adapter to the Hi-Speed USB 4-Port CardBus, then plug the switching power adapter into an appropriate power source. Insert the Cardbus into the Type II PC Card slot of your notebook computer with its 68-pin connector facing the slot.

  • Page 4: Driver Installation Windows

    Driver Installation Windows Windows 2000 SP4, XP, Server 2003 & 2008 and Windows Vista operating system will detect and install the drivers ™ automatically. No additional driver is necessary. To Verify Windows Installation Check Device Manager to verify installation. Windows 2000/XP/Server 2003: Right click My Computer, click Manage, then click Device Manager.
  • Page 5 For Windows Vista Under Universal Serial Bus controllers: - Standard Enhanced PCI to USB... - NEC PCI to USB Open Host Controller - NEC PCI to USB Open Host Controller - USB Root Hub - USB Root Hub - USB Root Hub Mac OS (v10.2.8) or later Mac OS X have built-in driver support for this controller.
  • Page 6 Blank Page...

  • Page 7: Technical Support And Warranty

    • Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.
  • Page 8 Fremont, CA 94538-3152, USA Ph: 510-657-8688 Hi-Speed USB 4-Port Cardbus is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Table of Contents