The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
Hold the power tool firmly with both hands and make
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
The power tool is intended for planing wood-based materials
such as beams and boards while resting firmly on the work-
piece. It is also suitable for chamfering edges and for rebat-
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Cutting depth scale
(2) Knob for setting the cutting depth (insulated gripping
(3) Chip ejector (GHO 26-82 D: Either right or left)
Rated power input
Max. planing width
Weight according to EPTA-Procedure 01:2014
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
Noise emission values determined according to
Typically the A-weighted noise level of the power tool is:
Sound pressure level 84 dB(A); sound power level 95
dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Bosch Power Tools
(4) Lock-off button for on/off switch
(5) On/off switch
(6) Changeover lever for chip ejector direction
(GHO 26-82 D)
(7) Planer base plate
(9) Handle (insulated gripping surface)
(10) Blade head
(11) Clamping element for planer blade
(12) Fastening screw for planer blade
(13) HM/TC planer blade
(14) Hex key
(15) Extraction hose (dia. 35 mm)
(16) Chip/dust bag
(17) Parallel guide
(18) Scale for rebate width
(19) Locking nut for rebate width setting
(20) Fastening screw for parallel/angle guide
(21) Angle guide
(22) Locking nut for angle setting
(23) Fastening screw for rebate depth guide
(24) Rebate depth guide
(25) Parking rest
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
3 601 EA4 0..
Total vibration values a
(triax vector sum) and uncertainty K
determined according to EN 62841-2-14:
= 8 m/s
, K = 1.5 m/s
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
English | 13
GHO 26-82 D
3 601 EA4 3..
1 609 92A 4LF | (26.10.2018)