Table of Contents
Advertisement
Illue 5, June 1999
If, during initial setup of the Optiset terminal, a line was
configured for Autoanswer, then incoming calls on that line are
connected automatically.
Depending on how the line was
configured, either no alerting or a single ring will occur for an
incoming call.
• Autoanswer Key
If no Optiset terminal lines were set up for Autoanswer. the
Autoanswer key can be used to initiate this feature. While this
feature is active. all incoming calls are answered automatically
without any action required by the user. Depending on how
the Line key ringing option was configured, and incoming call
may be accompanied either by no alerting or by a single ring.
Reject a Call (No Other Calls Active)
• Reject (Menu and Dialog Keys)
If
the calling-party information in the display indicates that the
incoming call is one you do not want to receive, use the dialog
keys to select the Reject Call option from the menu system.
Call alerting (ringing and status-light flashing) ceases.
• Disconnect (Key)
To reject an incoming alerting call, press the Disconnect key.
Alerting ceases immediately.
Reject a Call (With Another Call Active)
• Reject (Menu and Dialog Keys)
If, during an active call, alerting begins for another incoming
call, the menu system briefly displays the Incoming Call
Ringing menu. To reject the incoming alerting call, select the
Reject Call option from
the
menu.
Alerting ceases
immediately.
• Disconnect (Key)
If, during an active call, alerting begins for another incoming
call, the menu system briefly displays the Incoming Call
Ringing menu. While this menu is being displayed, you can
Issue 5, June 1999
reject the alerting call by pressing the Disconnect key. Alerting
ceases immediately.
Note that if you press the Disconnect key after the Incoming
Call Ringing menu is no longer displayed, the existing active
call is disconnected!
• Preview (Key)/line Key/Reject (Menu and Dialog Keys) or
Disconnect (Key)
To reject an alerting incoming call that occurs while you have
another call active, you can press the Preview key to place the
terminal in the preview mode; then press the line key
associated with the alerting incoming call; finally, use the menu
system to select the Reject Call option, or press the
Disconnect key. Alerting ceases immediately.
Reject All Calls (Do Not Disturb)
• Do Not Disturb (Key)
While no incoming calls are alerting, press the Do Not Disturb
key. The indicator next to the Do Not Disturb key lights. All
future incoming calls are automatically rejected, and no
alerting occurs, until the Do Not Disturb feature is turned off.
Clear an Active/Connected Call
• On-hook (Handset)
Place the handset back in the cradle to clear an active,
connected call.
• On-hook (Speaker Key)
If the microphone and speaker are being used, press the
Speaker key to clear an active, connected call.
• Disconnect (Key or Menu and Dialog Keys)
Select the Disconnect Call option from the menu system or
press the Disconnect key to clear an active, connected call. If
the handset is in use, it becomes idle until either the cradle
switch is pressed and released, a call on hold is retrieved, or a
30
1275·00030
1275·00030
31
Advertisement
Table of Contents
