Basic Functions; Secure Voice Transmission; Answering A Call - Siemens OPENSTAGE 20 2000 User Manual

Basic functions

Step by step
22
Basic functions
Please read carefully the introductory chapter
"Getting to know your OpenStage phone"
page 11 before performing any of the steps
described here on your phone.

Secure voice transmission

Prerequisite: The secure voice communication option
must be activated by your service personnel.
If you call a party or receive a call from a party over a se-
cure connection, a padlock icon
party's row on your graphic display. You can opt to have
voice connections that are no longer secure indicated
by a brief alerting tone and a window with the message
"Unencrypted call" (see

Answering a call

Your OpenStage phone rings with the tone signal set
when an incoming call is received. The call is also visu-
ally signaled on the call display.
If transmitted, calling party information (name, phone
number) appears on the display.
If you have set a pattern melody
ringtone page 107 on your phone, it is possi-
ble that service personnel preset a different ring-
tone or deactivates the ringtone, regardless of
the call type (e.g. an external or internal call).
An incoming call will interrupt any ongoing tele-
phone setting operations. When the call ends,
you can press the N key to return to the point
in the menu structure where you were interrupt-
ed.
1. Closed for secure or open for nonsecure voice communication
1
appears on the other
page 110).
page 107 or a