Records; Messages; Calls - Siemens OPENSTAGE 20 2000 User Manual

Records

Entries in the call list and messages in your mailbox system (if configured)
are known as records.
The LED on the O
Press the O key and use the click wheel to select the required submenu.
•

Messages

•

Calls

You can use the click wheel to navigate through the menus as described
on page 15.
Messages
If configured (contact the relevant service personnel), this provides you
with access to your mailbox system e.g. HiPath Xpressions.
If your system is appropriately configured, activating this function calls the
mailbox. Follow the voice mailbox instructions.
Calls
This list appears as soon as you receive new missed calls if you select the
option Calls in the Records menu. You can then scroll up or down to reach
the Calls menu. The following calls or call attempts are logged as call lists:
• Missed: Missed calls
• Dialed: Dialed calls (with or without connection)
• Received: Answered calls
• Forwarded: Forwarded calls
The number of missed calls and unchecked calls is shown on the idle dis-
play.
Call lists
Each call list may contain up to 30 entries. Once this limit is reached, the
oldest entry in the log is deleted. Multiple calls from the same number are
only listed once.
The following data is saved, e.g. for missed calls:
• Phone number/name depending on available data.
• Number of call attempts.
• The date and time of the last call attempt from each user listed.
Entries can only be saved if the caller ID is displayed as a name, number
or both. If the caller ID is not transferred, the call is saved as "Unknown".
You can delete all the entries from the respective call list
After selecting an entry, you can dial it immediately by confirming
page 64.
Getting to know your OpenStage phone
page 14 key lights up to signal new missed calls.
page 73.
19