12.2 References - Siemens ERTEC200 Manual

12.2 References:

/1/ Technical Reference Manual ARM946E-S REV1 16 February 2001 (DDI 0201A_946ES.PDF);
/2/ Technical Reference Manual ARM946E-S 16 December 1999 (DDI_ 0165A_9E-S_TRM. PDF);
/3/ AHB PCI Bridge Revision2.5 08 July 2002 (amba2pci_rev2.5.pdf);
/4/ AMBA Specification (Revision 2.0), 1999; ARM
TM
/5/ ARM Prime Cell
TM
/6/ ARM Prime Cell
/7/ Embedded Trace Macrocell Architecture Specification (ETM_Spec.PDF);
/8/ Multi-ICE System Design Consideration Applic.-Note 72 (DAI0072A_Multiicedesign-Notes.PDF);
/9/ IEEE Standard Test Access Port and Boundary-Scan Architecture (1149.1 IEEE Boundary Scan
2001.PDF);
/10/ IR35-107-3.pdf
/11/ LeadfreeIR50_60.pdf
/12/ Codeexpl.pdf
/13/ PHY_Data_Sheet.pdf
/14/ EB 200 Manual V1.1.0 (EB200_Manual_V110.PDF);
Copyright © Siemens AG 2007. All rights reserved.
Technical data subject to change
UART (PL010) Technical Reference Manual; ARM
Synchronous Serial Port (PL021) Technical Reference Manual;
97
ERTEC 200 Manual
Version 1.1.0