Digital Piano Operation; Listening To Demo Play; Demo Song List; Selecting A Tone - Casio CDPS-100 User Manual

Digital Piano Operation

Listening to Demo Play

1.
Press 3 FUNCTION and 4 GRAND PIANO
at the same time.
This starts playback of the two demo songs.
• For demo song play, the Digital Piano setup is
changed automatically to optimize it for the demo song
being played.
• To toggle between demo songs during playback, hold
down 3 FUNCTION and press the [–] (D4) or [+]
(E}4) keyboard key.
C1 C2 C3
[–] key (D4)
• Demo song play will repeat until you perform the
operation in step 2 below.
2.
To stop demo song play, press 3 FUNCTION
or 4 GRAND PIANO.
• If Auto Power Off is enabled, power will turn off
automatically at the applicable trigger time after a period of
non-use, even if demo play is being performed. You can
disable Auto Power Off, if you want, by performing the
operation under "To enable or disable Auto Power
(page EN-5).

Demo Song List

Song No. Song Name
1 Prélude
[Suite bergamasque]
2 Original
C4 C5 C6 C7
[+] key (E}4)
Tone Name
GRAND PIANO
STANDARD
ELEC.PIANO 1

Selecting a Tone

The Digital Piano has 10 built-in tones. In addition to using a
single tone, you can also select two different tones and sound
them together.
Use the Tone keyboard keys (C3 through A3) to select a tone.
C1
C8
• For information about tone names, refer to the
(page EN-21) and
Selecting the GRAND PIANO STANDARD
Tone
Press 4 GRAND PIANO. You can also select the GRAND
PIANO STANDARD tone using the operation under
a single tone" (page EN-8).
Selecting this tone causes the 4 GRAND PIANO button
lamp to light.
• The GRAND PIANO STANDARD tone is the default tone
when the Digital Piano is turned on.
• The 4 GRAND PIANO button lamp is unlit during demo
song play.
Off"
C2 C3 C4 C5
Tone keys (C3 through A3)
"Keyboard Function
C6 C7 C8
Tone names
"Tone List"
List" (page EN-22).
"To select
EN-7