Download Print this page

Memory Configuration For Smart Labels With Mlfb -03 - Siemens SIMATIC RF630L Smartlabel Operating Instructions Manual

Sensors

SIMATIC RF630L Smartlabel

1.4 Memory configuration for smart labels with MLFB -03

1.4

Memory configuration for smart labels with MLFB -03

Note

Validity of the memory configuration

Please note that the following memory configuration only applies to smart labels with the

following MLFB:

• 6GT2810-2AB03

Memory representation according to EPC

The memory of the ISO 18000-6C G2XM chip is logically divided into four different memory

banks:

Memory bank (decimal)

MemBank 11

MemBank 10

MemBank 01

MemBank 00

Memory type

Description

USER

User-writable USER memory area

TID

Is defined by the manufacturer, contains the class identifier and

serial number of a tag

EPC

Contains the EPC data, the protocol information and the CRC data

of a tag.

You can write to the EPC memory area. In the delivery condition,

the memory contents can have the following states:

•

RESERVED

Contains the access password.

containing the same data

containing different data

Operating Instructions, 06/2009, J31069-D0186-U001-A4-7618

SIMATIC RF630L Smartlabel

Table of Contents