Quick Commissioning - Siemens SED2 Operating Instructions Manual

SED2 AOP Operating Instructions

Quick Commissioning

NOTE:
Simultaneously press
The following table describes the main menu items.
Menu Item
Operate Displays the current status of the SED2 VFD/motor.
Diagnostics Displays a recent fault history.
Parameters Allows you to select a parameter group (similar to Parameter Filter P0004) and to
configure individual parameters.
Mode Allows you to select the AOP mode of operation as follows:
Upread Allows you to read a parameter set from a SED2 VFD to the AOP.
(upload)
Download Allows you to write a parameter set from the AOP to a SED2 VFD.
Language Allows you to select a new language for the AOP display.
Setup Allows you to customize the configuration of the AOP.
Timer Allows you to set a start and stop time for SED2 VFD operation.
Use and to scroll through the list of options and to highlight the Parameters item.
1.
Press to confirm the selection.
The AOP prompts to select the desired parameter group. Use
list of options and to highlight the All parameters item. Press
NOTE:
AOP Parameters, provides an overview of parameter access levels and a
procedure for editing parameters.
Use and to scroll through the parameters and to highlight User Access Level P0003.
2.
Press to confirm the selection and the cursor advances to the parameter value.
Use and to set P0003=3 (Expert).
Press to confirm the setting and the cursor returns to the parameter.
Use and to scroll through the parameters and to highlight Commissioning Parameter
3.
P0010. Press to confirm the selection and the cursor advances to the parameter value.
Use and to set P0010=1 (Quick Commissioning).
Press to confirm the setting and the cursor returns to the parameter.
8
and , at any time, to display the main menu.
Local
Master
Internal
Slave
PC Mode
Description
and
to confirm the selection.
Siemens Building Technologies
to scroll through the