Gps Evaluation Software; Integrated Documentation Suite (Ids) - Siemens XT65 User Manual

Java User's Guide
3.3 Installation CD for TC65
27
3.3.1.8

GPS Evaluation Software

The GPS Evaluation Software (u-center) was developed by u-blox AG, Switzerland. This soft-
ware demonstrates the capabilities of global positioning system (GPS) part incorporated in the
XT75 module.
The latest version of the GPS Evaluation Software (u-center) can be downloaded for free from
the internet: http://www.u-blox.com/products/u_center.html.
The installed GPS Evaluation Software Version can be read out after starting u-center and
selecting:
u-center menu Help
e.g. Version 4.00
Inside this dialog box you will find contact and support address as well.
Please make the following preparations before using the u-center tool together with XT75
(module with GPS support):
Step 1:
Install u-center
→
GPS_Evaluation_SW\ucentersetup.exe (on XT75 CD)
Step 2:
Switch to transparent GPS mode by using the AT command
AT^SGPSS=1,1
Step 3:
Configure the connected COM port (ASC0 of the XT75 module) by using the
u-center menu Receiver
Now the XT75 module and the u-center are ready for operation.
3.3.1.9

Integrated Documentation Suite (IDS)

The Integrated Documentation Suite (IDS) is installed together with SMTK and can be
accessed via index.html file under the directory "\IDS" with a browser. Another possibility to
access IDS is by using the IMP-NG Java documentation "Javadoc" inside the IDE and selecting
the hyperlink IDS placed inside the main menu of IMP-NG Javadoc.
Please keep in mind that the internal structure of JBuilder IDE does not support opening the
IDS from inside the JBuilder IDE using hyperlinks.
A further hyperlink to IDS is located in the start menu of <productname> and can be selected
via "Integrated Documentation Suite (IDS)".
wm_java_usersguide_v12
Confidential / Released
→
About u-center... and looking for the u-center version:
Build
→
Port and Receiver
Page 21 of 123
→
Baudrate
s
2008-02-25