Device Manag; Master Reset - Siemens S75 User Manual

82 Setup

Device manag.

The device manager can be used, for
example, to transfer configuration
data from the service provider via
WAP push (page 53).
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the service pro-
vider. You can start immediately.
• Access profiles have already been
created by your service provider.
Then select profile and activate.
• The access profiles must be con-
figured manually. If necessary,
contact your service provider. You
will also find the current settings
for the service provider on the In-
ternet at
www.siemens.com/
mobilephonescustomercare
under "FAQ".
Active access
Select function.
I
Establish a connection to
§Start§
the active profile.
• Profile active
After the data has been transferred:
Confirm.
§OK§
• No profile active
The list of profiles is chosen for you
to choose from.
Select profile.
I
Activate the profile.
ì
Or
§Options§
Open menu, then select
Edit and make entries.
Last connection
The data for the last con-
ö nection is displayed.

Master reset

The phone is reset to the default val-
ues (factory setting). This does not
affect SIM card and network settings
or data saved during Instant
Messaging.
Alternatively, in standby mode
enter:
*
# 9 9 9 9 #
A