Call Setup - Siemens S75 User Manual

78 Setup

Call setup

¢ ¢
Call setup
T
C
¢
Select function.
Hide ID
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
Select the condition under which
calls should be diverted to your mail-
box or another phone number. To
set diversion:
Select condition,
I e.g. Unanswered.
Confirm change, then
ñ select Set.
Enter phone number.
J
Open, then select Save.
§Options§
All calls
All calls are diverted.
Ç
b
Unanswered
Includes the conditions
reply, Busy, see below.
No
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
b
Busy
Divert occurs if a call is in progress. If
Call waiting
the call waiting tone during a call.
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Symbol in the top line of
display in standby mode.
Not
is activated, you will hear
b
reachable,
b
b