Putting The Handset Into Service; Removing The Protective Cover; Inserting The Batteries - Siemens Gigaset Gigaset S1 Operating Manual

Putting the handset into service

Removing the protective cover

Remove the protective cover from the display before
putting the handset into service.

Inserting the batteries

Two batteries are supplied with the Gigaset S1 professional while Gigaset
SL 1 professional comes with a single battery pack. The batteries are sup-
plied uncharged. They are charged in the handset.
Note:
• Please observe the safety notes on the back cover.
• Only use approved batteries (
• Always replace both batteries at the same time and only use
two batteries of the same type/ from the same manufacturer!
• Open the battery compartment in a dust-free environment only.
• Your telephone directory entries and all settings remain stored
even if you remove the batteries. The date and time settings
will be reset.
• Only remove the batteries if they are defective. Any unneces-
sary removal of the batteries reduces their lifespan.
Opening the battery compartment and inserting the batteries
Press down on the ridged surface and slide the cover from the battery
compartment. Insert the approved battery(ies).
Putting the handset into service
page 15).
Gigaset S1 professional
Gigaset SL 1 professional
13