Acall - Automatic Alarm Calling; Infosms - Sending Of Information Messages About Operation - Siemens C35i User Manual

Gsm remote supervision
Hide thumbs Also See for C35i:
Table of Contents

Advertisement

Command
Pppp
Number
*1) The space is between key word of command „MCALL" and value of parameter „h"
*2) Number can be entered in national format – e.g. 606445566 but also in international
format – e.g. +420606445566. No number is activated from production.
After entering this parameter GB 051 calls set number once a month in order to
spend at least one tariff impulse.
If you want to use this service it is recommended to set-up number of your fax or
number of time information. It is not recommended to set your cell phone number
because GB 051 does not use real time and call can come during night.
If you want to deactivate this function set command without parameter – for
example XXppppMCALL without further parameters.
4.6. ACALL – Automatic Alarm Calling
By activation of any of SMS inputs set phone number is automatically chosen
together with sending SMS message. Dispatched SMS message can be
highlighted if you set ACALL number identical to SMSNO number or you can
report alarm on fixed phone lines where SMS messages cannot be received. After
answering warning tone is generated into speaking line.
Command
Pppp
i
Number
*1) The space is between key word of command „ACALLi" and number
*2) Number can be entered in national format – e.g. 606445566 but also in international
format – e.g. +420606445566. No number is activated from production.
If you want to deactivate this function set command without parameter – tm.
XXppppACALLi without further parameters.
4.7. INFOSMS – Sending of Information Messages about Operation
GB 051 allows set-up of one cell phone number where all information SMS
messages about change of PIN, reset, initialization, power supply failure, change
in configuration, operation time and input activation are subsequently sent.
Command
Pppp
Number
*1) The space is between key word of command „INFOSMS" and number
*2) Number can be entered in national format – e.g. 606445566 but also in international
format – e.g. +420606445566.
XXppppMCALLVnumber
Four digits of current PIN
Maximum 14 digits of number of any phone
XXppppACALLiVnumber
Four digits of current PIN
Number of input: 1 to 8
Maximum 14 digits of number of any phone which allows
display of caller's number
XXppppINFOSMSVnumber (no number activated from
*1)
production)
Four digits of current PIN
Maximum 14 digits of cell phone number
13
*1)
*1)
*2)
*2)
*2)

Advertisement

Table of Contents
loading

This manual is also suitable for:

M35 or s35Gb 051

Table of Contents