Appendix; Operating On Base Stations In The Gigaset Family; Contact With Liquid - Siemens Gigaset 4000i Micro Operating Instructions Manual

Appendix

Operating on base stations in the Gigaset family

Gigaset 1000/2000/3000
The following functions on your 4000i Micro/Comfort handset are not
supported by base stations in this Gigaset family:
G Setting the time (the time is not transferred after the handset has
been switched off)
G Changing the display language
G
Room monitoring (cannot be switched off externally)
G SMS transfer (SMS-compatible base stations only)*
Gigaset 4010/4015 Classic
The following functions on your 4000i Micro/Comfort handset are not
supported by the above-mentioned base stations:
G Changing the display language
G SMS transfer*
G Setting authorisation stages
* Not available in all countries
Looking after your phone
Wipe the base station and handset with a damp cloth or an antistatic
wipe. Never use a dry cloth as this can cause static discharge.

Contact with liquid

If the handset should come into contact with liquid,
on no account switch the device on.
Remove all batteries immediately.
Allow the liquid to drip out of the device, and then dab all parts of the
device dry.
Keep the handset with the batteries removed in a warm, dray place for
at least 72 hours. In many cases, you will then be able to use it again.
!
Appendix
25