Attaching A Compact Camera To The Selfie Stick; Taking Selfies; Turning Off The Appliance - Silvercrest SSP 2600 A1 Operating Instructions Manual

Bluetooth selfie stick
Hide thumbs Also See for SSP 2600 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Attaching a compact camera to the
selfie stick
Unscrew the mount
Screw the compact camera onto the thread of the
tripod head
Set the horizontal alignment of the compact camera.
Undo the fastening screw
it to the right. Turn the fastening screw
to lock the compact camera into this position.
Set the vertical tilt angle of the compact camera.
Loosen the fastening screw hinge joint
mount by turning it anticlockwise. Lock the compact
camera into this position by turning the fastening
screw hinge joint
Taking selfies
Pull out the telescopic shaft
Turn the individual elements of the telescopic shaft
clockwise to lock them in place.
If you want to unlock the telescope shaft
the individual elements in the opposite direction
(anticlockwise).
Turn the camera function of the smartphone on. If
you are using a compact camera, make the required
photo settings on the compact camera.
Press the photo button
smartphone or compact camera will take a photo.
The Bluetooth
an active Bluetooth
Turning off the appliance
Press the On/Off button
off the selfie stick. The Bluetooth
three times.
NOTE
The appliance turns off automatically after around
5 minutes, if you do not press any buttons during
this time.
SSP 2600 A1
from the tripod head.
.
clockwise.
on the selfie stick. Your
LED
flashes briefly and shows
®
connection.
®
on the mount by turning
to the desired length.
for 2 seconds to turn
LED
®
GB
to the left
on the
turn
flashes
11
│ 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents