Connecting To Tv With Audio And Video Inputs; Connecting To Additional Component With Video And Digital Outs - Sherwood Newcastle V-756 Operating Instructions Manual

Sherwood newcastle dvd player owners manual v-756
Table of Contents

Advertisement

CONNECTING TO TV WITH AUDIO AND VIDEO INPUTS

You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the MIXED
AUDIO OUTs 1 to your amplifier or receiver.
To connect these jacks correctly, refer to "Connecting MIXED AUDIO OUTs 1" and "Connecting VIDEO OUTs" on the
previous page.
Note :
If your TV has only a monaural audio input instead of stereo, you will need to use an optional audio cord which converts
stereo audio output to monaural.
Do not connect the VIDEO OUTs of the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy
protection builtinto the DVD software.
Monitor TV

CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO AND DIGITAL OUTS

When these VIDEO and DIGITAL INs are connected to the corresponding VIDEO and DIGITAL OUTs of additional DVD
player, etc., you can also enjoy high-quality audio and surround by using the built-in DTS/Dolby Digital/MPEG Multichannel
decoder of this unit. If this is the case, be sure to connect the 6.1 CH AUDIO OUTs (and MIXED AUDIO OUTs ) to your
amplifier or receiver.
When you connect the additional equipment with a digital output, before using, change the SYSTEM setting according to the
type of the DIGITAL OUT jack of the equipment connected. (Refer to "SETTING THE SYSTEM" on page 29.)
The digital audio signal from either the OPTICAL or the COAXIAL DIGITAL IN can be directly transferred to both of the
DIGITAL OUTs of this unit. If this is the case, be sure to connect these DIGITAL OUTs to your amplifier, etc.
A signal from the S-VIDEO IN can be directly transferred to only the S-VIDEO OUT and a signal from the regular VIDEO IN to
only the regular VIDEO OUTs 1 and 2.
Depending on your use, the unit's settings should be set properly. With DIGITAL OUT connections, the DIGITAL OUTPUT
setting should be made from this unit and with 6.1 CH AUDIO OUT connections, settings for "D·R·C", "SURROUND" and
"SPEAKER OPTIONS" on the AUDIO SETUP menu should be made.
For correct connection and use, refer to "Connecting DIGITAL OUTs" and "Connecting 6.1 CH AUDIO OUTs" on the previous
page.
The audio component such as CD player, etc. can be also connected to these DIGITAL INs only, not the VIDEO INs.
DVD player, etc.
Optical digital cord
(not supplied)
COMPONENT VIDEO IN
S-VIDEO IN
VIDEO IN
AUDIO IN
Component video cord
(not supplied)
S-video cord (not supplied)
Video cord (Yellow, supplied)
Video cord
(not supplied)
VIDEO OUT
75Ω coaxial digital
cord (not supplied)
S-video cord
(not supplied)
S-VIDEO OUT
COAXIAL DIGITAL OUT
OPTICAL DIGITAL OUT
Green
Red
Blue
Audio cord (Red&White, supplied)
7
This Unit
This unit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents