Get Started; Connect Power - Philips AJ2000 User Manual
Hide thumbs
Also See for AJ2000:
- User manual (16 pages) ,
- Quick start manual (2 pages) ,
- User manual (16 pages)
Table of Contents
Advertisement
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electric shock! When you unplug the AC power
plug, always pull the plug from the power outlet. Never
pull the cord.
•
Risk of explosion! Keep the battery away from heat,
sunshine or fire. Never discard battery in fire.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The battery contains chemical substances, so it should
be disposed of properly.
Connect the power adaptor to the wall outlet.
Back-up battery
You can only use AC power as power supply.
The lithium CR2032 battery can only back up
clock and alarm settings.
When power is disconnected, the display
backlight is off.
AJ2000_93_UM_EN.indd 5
For first-time use:
Remove the protective tab to activate the
battery.
To replace the battery:
1
Push the clip to the left and pull out the
battery tray.
2
Insert 1 x CR2032 battery as illustrated.
CR2032
CR2032
EN
5
5/06/2017 3:09:06 PM
Advertisement
Table of Contents
