Product Overview; Hardware And Software Requirements - Siemens CP 1625 Operating Instructions Manual

Product overview

Principle
The following table provides an overview of the components of the CP 1625 and
CP 1625Dev:
Components
Strain relief
Adhesive feet - 4 units
Terminal block for 24 V DC power supply
Advanced interface configuration
•
•
•
•
•
•
Note
If the consignment is incomplete, contact your supplier or your local Siemens office.
2.1

Hardware and software requirements

Hardware requirement
The CP 1625 requires a short PCIe slot with master capabilities for operation.
Software requirement
The CP 1625 requires additional software for operation, e.g. CPU 1507S or a dedicated
SDK.
Siemens Automation Parts
CP 1625 / CP 1625Dev
Operating Instructions, 04/2018, A5E43075902-AA
X500: UART0
X501: UART1
X602: Interface for PROFINET certification
X2200: Jumper for selecting boot source
X1600: Jumper for selecting restart behavior
X2000: Jumper for selecting power supply source
2
CP 1625 CP 1625Dev
x x
- x
- x
- x
9