Download  Print this page

Applicable Crimping Terminal - Mitsubishi Electric MELSEC-I/OLINK Handbook

Transition.
Hide thumbs

Advertisement

6
REPLACING THE I/O MODULES

6.3 Applicable Crimping Terminal

Applicable crimping terminals are different between MELSEC-I/OLINK and AnyWire.
This section describes weather it is necessary or not to change the crimping terminals when the existing
external wiring for the MELSEC-I/OLINK is used.
(1) AnyWire terminal block
(2) Crimping terminal sizes
Crimping terminal model
I/OLINK
Applicable crimping
terminal
AnyWire
Applicable crimping
terminal
Terminal block screws
Dimension (mm)
B
1.25-3
5.5
V1.25-3
1.25-YS3A
2-S3
2-YS3A
6.4
V1.25-YS3A
V2-S3
V2-YS3A
R2-3SL
RAV2-3SL
5.5
RAP2-3SL
VD2-3S
VD2-3.5SL
VD2-3.5S
5.7
VDAV2-3.5SS
VDAV2-3.5S
7.62
6.2
9.04
(Unit: mm)
d2
• If existing wires are used, the crimping
3.2
terminals can also be used without changing
them.
• If existing wires are used, the crimping
3.7
terminals must be changed.
3.7
3.3
3.7
Remarks (restrictions)
6
- 40

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELSEC-I/OLINK

This manual is also suitable for:

Anywire db a20

Comments to this Manuals

Symbols: 0
Latest comments: