Transport And Storage - Husqvarna PG400 Operator's Manual

Transport and storage

• Secure the equipment during transportation in order
to avoid transport damage and accidents.
The machine should be transported under cover where
possible, limiting the exposed to natural elements - in
particular rain and snow.
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• The machine should always be stored in a dry place
when not in use.
Transport
The machine can be taken apart in to two components to
give a smaller size when transporting.
• Disconnect the motor cable from the electrical box.
Standing beside the grinder, squeeze the handle on the
central hinge while simultaneously angling the upper
frame to the inclined transport position.
• Loosen the nuts a few turns to release any pressure.
• Pull out the locking pins and remove the bolts on each
side of the grinding head.
16 – English
OPERATING
1
3
2
• Remove the wheel chassis from the grinding head.
• Standing beside the wheel chassis, squeeze the
handle on the central hinge while simultaneously
angling the upper frame forward to the lifting position.
• Loosen the locking knobs on the support foot.
• Hold the handlebar to stabilize the frame and lift out
and up the support foot.