Installation - AEG IAE84850FB User Manual

20 www.aeg.com
Problem
and a number come on.
You can hear a constant
beep noise.
10.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the

11. INSTALLATION

WARNING!
Refer to Safety chapters.
11.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
Possible cause
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
FlexiBridge operates. One
or more sections of the func-
tion mode which operates
are not covered by the cook-
ware.
PowerSlide operates. Two
pots are placed on the flexi-
ble induction cooking area.
There is an error in the hob.
The electrical connection is
incorrect.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
Remedy
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech-
nical data".
Place the cookware on the
correct number of sections
of the function mode which
operates or change the func-
tion mode. Refer to "Flexi-
ble induction cooking area".
Use only one pot. Refer to
"Flexible induction cooking
area".
Deactivate the hob and acti-
vate it again after 30 sec-
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.