When servicing, use only
identical replacement parts. Use of any other
parts may create a hazard or cause product
Always wear eye
protection with side shields marked to
comply with ANSI Z87.1, along with hearing
protection. Failure to do so could result in
objects being thrown into your eyes resulting
in possible serious injuries.
To avoid serious personal
injury, always remove the battery pack from
the tool when cleaning or performing any
Wear safety gloves when
working on the cutting device and close to it!
Use appropriate tools to remove debris e.g. a
brush or wooden stick! Never use your bare
Before each use, inspect the entire product
for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Tighten
securely all fasteners and caps and do
not operate this product until all missing or
damaged parts are replaced. Please contact
a qualified service center for assistance.
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil,
Do not at any time let
brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which
may result in serious personal injury.
CARE AND MAINTENANCE
15 ― English
CLEANING THE BLADE
■ Keep the cutting blades clean and free of
NOTE: Remove battery before performing
■ Use a brush or high pressure air (max.
3 bar) to remove debris from the blades.
■ With gloves on, clean the blades with a dry
cloth to remove loose material.
■ Apply a small amount of light machine oil
to the edge of the top blade to retain good
cutting performance. See Lubricating The
■ Keep the cutting blades sharp. Have
heavily worn or damaged blades replaced
with identical parts by a qualified service
■ Adjustment of the distance between blades
is not necessary, as this is predetermined by
■ Store the battery pack fully charged.
■ Recharge the battery pack whenever there
is a noticeable reduction in the performance.
Do not allow the battery pack to become
■ Do not recharge a battery pack that is
already fully charged. Overcharging shortens
■ Once the battery pack is fully charged,
remove the battery from the charger and
disconnect the charger from the outlet.
■ Do not store the battery pack on the tool or
in the charger.
■ Recharge the battery at a temperature
F and 122
is hot, allow it to cool down before recharging.
F. If the battery pack