Adjusting The Projector Function ("Prj - Adj" Menu); Auto Power Off Function; Auto Restart Function; Standby Mode - Sharp XG-F260X Operation Manual

Adjusting the Projector Function ("PRJ - ADJ" Menu)

Picture SCR - ADJ
Auto Power Off
Auto Restart

STANDBY Mode

System Sound
Speaker

Audio Input

RS-232C
Fan Mode
System Lock
Lamp Timer(Life)
SEL./ADJ.

1 Auto Power Off Function

1 1
1 1
Selectable
items
When no input signal is detected for
On
more than 15 minutes, the projector will
automatically enter standby mode.
Off The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.

2 Auto Restart Function

2 2 2 2
Selectable
items
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
PRJ - ADJ Help
On
On
Standard
On
On
Audio 1
9600 bps
Normal
Disable
0 h 0 min 100%
ENTER END
Description
Description
Menu operation n Page
3 STANDBY Mode
3 3
3 3
When set to "Eco", power consumption is
reduced in standby mode.
Selectable
items
Eco The monitor output and RS-232C functions
are switched off in standby mode.
Standard The monitor output and RS-232C
functions are activated even if the
projector is in standby mode.
4 Setting the Confirmation
4 4
4 4
Sound (System Sound)
Selectable
items
On A confirmation sound is made when
the projector turns on/off.
Off No confirmation sound is made.

5 Speaker Setting

5 5
5 5
Selectable
items
On The audio signal is output from the
internal speaker.
Off The audio signal is not output from the
internal speaker.
6 6 Monitor Output 6 6 Audio Input
6 6 6 6
6 6
This function allows you to select an
appropriate combination of audio input
terminals for each input mode.
Selectable
items
Audio 1 The AUDIO 1 input terminal is used as
an audio input terminal.
Audio 2 The AUDIO 2 input terminal is used as
an audio input terminal.
37
Description
Description
Description
Description
43