Maintenance - Husqvarna K 535i Operator's Manual

Hide thumbs Also See for K 535i:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
Make an estimate of the possible movement of the
work piece during the last phase of the cutting
operation.
Make sure that the cut opens during the cutting
operation.
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance work on
the product.
WARNING: Remove the battery before you
do maintenance on the product.
WARNING: Failure to do maintenance
correctly can decrease the product life cycle
and increase the risk of accidents. All
servicing and/or repair work must also be
done by a professional. Turn to your
servicing dealer for more information.
Maintenance and checks of the
safety devices on the product
To do a check of the power trigger lockout
1. Make sure that the power trigger and power trigger
lockout move freely and that the return spring works
correctly.
745 - 008 - 12.11.2018
To manage dust
The product has a low flushing water kit. Use wet
cutting when possible. See instructions in
connect coolant water on page 15 . The correct flow
is different for different types of tasks. If the water
hose comes off at the supply source, the supplied
water pressure can be too high. See
on page 22 for recommended water pressure.
Adjust the water flow with the valve.

Maintenance

2. Press down the power trigger lockout and make sure
that it goes back to its initial position when you
release it.
3. Make sure that the power trigger is locked at the idle
position when the power trigger lockout is released.
4. Start the product and apply full power.
5. Release the power trigger and make sure that the
cutting blade stops. If the cutting blade rotates when
the power trigger is in the idle position, turn to your
servicing dealer.
To do a check of the keypad
1. Start the product. See
trigger lockout on page 19
2. Press the start/stop button again.
To
Technical data
To do a check of the power
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents