Husqvarna K 535i Operator's Manual page 9

Personal protective equipment
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electrical
shock, fire and/or serious injury.
• You must use approved personal protective
equipment during operation. Personal protective
equipment does not give you full protection from
injuries but it decreases the degree of injury if an
accident occurs. Speak to your servicing dealer for
recommendations about which equipment to use.
• Your clothing must be close-fitting but not limit your
movements. Regularly do a check of the condition of
the personal protective equipment.
• Use an approved protective helmet.
• Use approved respiratiory protection.
• Use approved hearing protection. Long-term
exposure to noise can result in permanent damage
to the hearing.
• Use protective glasses or a face visor to decrease
the risk of injury from particles and dust. This can
result in serious injury, especially to the eyes.
• Use heavy duty protective gloves.
• Use boots with steel toe-cap and non-slip sole.
• Always have a first aid kit kit with you.
Safety devices on the product
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electrical
shock, fire and/or serious injury.
• Do not use a product with damaged safety
components. The safety equipment must go through
inspection and maintenance regularly. Turn to your
servicing dealer for repair if an inspection of a safety
device is not approved.
Keypad
The warning indicator flashes if there is a risk of
overload. The overload protection temporarily stops the
product and you can not use the product until the
temperature restores. If the indicator shows a solid light,
turn to your servicing dealer.
745 - 008 - 12.11.2018
The automatic stop function
The product has an automatic stop function that stops
the product if you do not use it for one minute.
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you put your hand around the
handle and press the power trigger lockout (A), it
releases the power trigger (B). If you release the handle,
the power trigger and the power trigger lockout move
back to their initial positions.
A
B
Blade guard
The blade guard protects the cutting particles to damage
the user. The protection prevents parts from loosening
and damaging the user
Battery safety
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electrical
shock, fire and/or serious injury.
• Only use the Husqvarna BLi batteries that we
recommend for your product. The batteries are
software encrypted.
• Use the Husqvarna BLi batteries that are
rechargable as a power supply for the related
Husqvarna products only. To prevent injury, do not
use the battery as a power supply for other devices.
• Risk of electrical shock. Do not connect the battery
terminals to keys, screws or other metal. This can
cause a short circuit of the battery.
9