Auto Sync (Auto Sync Adjustment); Signal Info (Checking The Input Signal) - Sharp Notevision PG-B10S Operation Manual

Computer Image Adjustment
Auto Sync
ment)
Used to automatically adjust a computer image.
Select "Auto Sync" on the "Fine Sync" menu
and set it to " "(ON) or "
Setting the menu screen
Example: "Fine Sync" menu screen for
INPUT 1 mode
Description of Auto Sync Adjustment
Selectable Settings
Auto Sync adjustment will occur when
the projector is turned on or when the
ON
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
OFF
cally performed.
Note
Auto Sync adjustment is also performed by
pressing on the projector or
on the remote control.
The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 39.)
-40
(Auto Sync Adjust-
"(OFF).
Page 34
Description
Signal Info
Input Signal)
Select "Signal Info" on the "Fine Sync" menu
to check the current input signal informa-
tion.
Checking the menu screen
Example: "Fine Sync" menu screen for
INPUT 1 mode
Note
The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
(Checking the
Page 34