Base Setting - Beko BD-300 User Manual

! If you have turned auto-talk on, do not press the CALL button after you have answered a
call by lifting the handset, otherwise, you'll disconnect the call.
To Lock /Unlock the keypad
Press MENU button and " " button consecutively to lock or unlock the keypad.

Base Setting

Note: The default PIN is: 0000
Call Barring Function (Optional)
Call barring enables you to restrict or bar certain types of calls from your phone.
To set call barring number
1. Press MENU button then UP/DOWN button until the display shows BASE SET
2. Press the OK button, the display shows PIN?
3. Key in your PIN number and press the OK button, then press UP/DOWN button to
the location BARRING
4. Press the OK button, then UP/DOWN button. The display shows one of the numbers
from 1 to 5 (The maximum call barring numbers you can set), and then key in the
telephone number you want to set call barring
5. Press OK button, then the display shows HS?
Key in the handset number that you want to set call barring
6. Press OK button to confirm
To delete call barring number
1. Press MENU button then UP/DOWN button until the display shows BASE SET
2. Press the OK button, the display shows PIN?
3. Key in your PIN number
4. Press the OK button, then UP/DOWN button to the location BARRING
5. Press the OK button, the display shows the call barring number you set.
6. Press the CLEAR button to delete the number
7. Press OK button to confirm
Base Melody
You can adjust the Base Melody following the below instruction.
1. Press MENU button then UP/DOWN button to the location BASE SET
2. Press OK button and Key in the PIN number
3. Press OK button then UP/DOWN button to the location B Melody
4. Press OK button and press UP/DOWN button to change the melody
5. Press the OK button to confirm the melody you chosen
Base Volume
You can adjust the base volume following the below instruction.
1. Press MENU button then UP/DOWN button to the location BASESET
2. Press OK button and Key in the PIN number
3. Press OK button then UP/DOWN button to the location B VOLUME
The display shows the current volume level