Advertisement
Supplied accessories
Car connecting pack (1)
Carrying case with Velcro strip (1)
Before installation
Do not install the recorder in a location which:
• interferes with your driving.
• may be dangerous for passengers.
• interferes with opening of the glove box or ashtray.
• is a near heat source.
• is exposed to direct sunlight, excessive dust, or moisture (especially on a dashboard).
• is an unstable place.
• may interfere with objects around the recorder.
Sony will not be responsible for any problem that results from the incorrect installation of the
unit.
If you have any questions or problems concerning your unit, please contact your nearest Sony
dealer.
Installation
1
Insert the recorder into the carrying case
with Velcro strips.
2
Wipe the surface of the console box,
and then attach the carrying case to
the console box with the supplied
Velcro strips.
Bottom of the recorder
Velcro
strip
Console box
Notes
• Make sure the carrying case is firmly closed and affixed to the console box while the recorder is inside of
it. Otherwise the recorder might fall out from the carrying case.
• If your car will be parked for a long time, remove the recorder from the carrying case to prevent its
exposure to direct sunlight.
Connection
To listen to the recorder through your car cassette deck, connect it as follows:
Car cassette deck
To a cassette
insertion door
Car
connecting
pack
Audio signal
Recorder
To i
(headphones/
earphones)
Advertisement
