Table of Contents
Advertisement
If you have to install your appliance in a cold room, read the LOW AMBIENT
SWITCH USE on page 12.
3. Do not place the appliance near cookers, radiators or in direct sunlight as this
will cause your appliance to work harder. If installed next to a source of heat
or freezer, maintain the following minimum side clearances:
From Cookers
From Radiators
From Freezers
4. Make sure that sufficient room is provided
around the appliance to ensure free air
circulation.
Fit the Two plastic wall spacers
supplied with the appliance rotating
1/4 turn to the condenser at the back
of the appliance (See Diagram).
5. The fridge/freezer should be located on a
smooth surface. The two front feet
can be adjusted as required. To ensure
that your appliance is standing
upright adjust the two front feet by turning
clockwise or anti-clockwise, until
the product is in firm contact with the floor.
Correct adjustment of feet avoids
excessive vibration and noise.
50 mm (2")
300 mm (12")
25 mm (1")
5
GETTING TO KNOW YOUR COMBI BEKO FRIDGE / FREEZER
6
Advertisement
Table of Contents
