Basic Operation - Sharp PN-655RU Operation Manual

Basic Operation

Generally the monitor is operated using the remote control unit.
20
E
INPUT (Input mode selection)
The input mode selection menu is displayed.
Press or to select the input terminal, and press
the terminal.
* If the remote control unit is not available, you can select the input
terminal by pressing the input switch on the monitor with a pointed object.
(See page 8)
DIGITAL PC digital RGB input terminal
ANALOG PC analog RGB input terminal
COMPONENT Component video input terminal
VIDEO
Composite video input terminal
MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the previous level.
MENU
Displays and turns off the menu screen (see page 23).
VOL +/- (Volume adjustment)
Pressing or displays the VOLUME menu when the menu screen
is not displayed.
V O L U M E 15
Press to increase the volume, and
* If you do not press any buttons for about 4 seconds, the VOLUME menu
automatically disappears.
BRIGHT +/- (Backlight adjustment)
Pressing or displays the BRIGHT menu when the menu screen is
not displayed.
B R I G H T 15
Press to increase the brightness of the screen, and
the brightness of the screen.
* If you do not press any buttons for about 4 seconds, the BRIGHT menu
automatically disappears.
SIZE (Screen size selection)
Each time you press this button, the screen size changes in the following
order (see pages 21 and 22):
• WIDE → ZOOM 1 → ZOOM 2 → NORMAL → DotbyDot → WIDE...
Video Audio
PC audio input terminal
Audio input terminals
to decrease the volume.
to change
to decrease