What should I do if my Sharp LC42D65U TV does not turn on?

If your Sharp LC42D65U TV does not turn on, follow these steps:Check if you pressed TV POWER on the remote control unit.If the POWER indicator on the TV does not light up, press POWER on the TV.Ensure the AC cord is connected.Verify that the power has been turned on.If the unit still does not power on, unplug the television from the outlet and repeat the installation steps.In cases of improper operation due to external influences such as lightning or static electricity, turn off the TV's power or unplug the AC cord and replug it in after 1 or 2 minutes.

How can I perform a factory reset on my Sharp LC42D65U TV?

To perform a factory reset:On the screen, "Return to the factory preset values" will be displayed. If you have set a Secret No., input the 4-digit secret number.When "Now, TV will restart automatically. OK?" displays, select "Yes".When "Now initializing..." displays, select "Yes". The TV will then restart, and the screen will have returned to its original settings. Note that Channel Setup, Language, Secret number, and TV Location settings will not be changed. For more information, see page 27 of the manual.

Why is there no sound coming from my Sharp LC42D65U TV?

If there is no sound coming from your TV:Check if the volume is too low and increase it if necessary.Verify that "Variable" is selected in the Output Select settings.Check if the MUTE button on the remote control unit has been pressed, and press it again to unmute if needed.

How can I troubleshoot common display problems on my Sharp LC42D65U TV?

To troubleshoot common display problems:If the picture is cut off or has sidebar screens:Check if the image position is correct.Ensure screen mode adjustments, such as picture size, are made correctly.If there is strange color, light color, or color misalignment:Adjust the picture tone.Consider if the room is too bright, which can make the picture appear dark.Check the input signal setting. For more information, see pages 20, 23, 26, 27 and 41 of the manual.

What should I do if the remote control for my Sharp LC42D65U TV stops responding?

If the remote control stops responding:Check if the FUNCTION setting on the remote control is set to the TV position.Verify that the batteries are inserted with correct polarity (+, - aligned).If the batteries are worn out, replace them with new ones.Ensure the remote control is not being used under strong or fluorescent lighting, or if a fluorescent light is illuminated near the remote control sensor on the TV. If so, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.

What are the available input ports on the Sharp LC42D65U TV?

The Sharp LC42D65U TV has the following input ports:INPUT 1: AV in (composite video) and Component in.INPUT 2: Component in and S-VIDEO in.INPUT 3: AV in (composite video).INPUT 4 (PC-IN): 15-pin mini D-sub female connector (RGB) and Audio in (Ø 3.5 mm jack).INPUT 5 (HDMI): HDMI in.INPUT 6 (HDMI): HDMI in and Audio in (Ø 3.5 mm jack).INPUT 7 (HDMI): HDMI in.INPUT 8 (HDMI): HDMI in.INPUT 9 (HDMI): HDMI in.ANT/CABLE: 75 Ω F Type for analog and digital TV signals. For more information, see pages 12, 14, 15 and 43 of the manual.

How can I optimize the picture settings on my Sharp LC42D65U TV?

To optimize the picture settings:Press MENU to display the menu screen, then select "Picture".Select a specific adjustment item using ▲/▼.Adjust the setting using ◄/► or ▲/▼, then press ENTER.Press MENU to exit.You can adjust the following settings in the Picture Menu: Backlight Contrast Brightness Color Tint Sharpness For advanced picture settings, you can adjust: C.M.S. (Color Management System): Hue and Saturation. Color Temp. (Color Temperature): High, Mid-High, Middle, Mid-Low, Low, R Gain, G Gain, B Gain. Active Contrast: On or Off. I/P Setting: Fast or Slow. Film Mode (3:2 pull-down): On or Off. Digital Noise Reduction: Off, High, Middle, or Low. 3D-Y/C: Slow, Standard, Fast, or Off. Monochrome: On or Off. Range of OPC: Adjusts the brightness level range of the OPC sensor's automatic adjustments. For more information, see pages 21, 22, 23 and 24 of the manual.

How do I access and use the on-screen menu for the Sharp LC42D65U TV?

To access and use the on-screen menu:Press the MENU button on the remote control to open or close the menu screen.Use the ▲/▼ buttons to select the desired item.Use the ◄/► buttons to adjust the item.Press ENTER to go to the next step or complete the setting.Press RETURN to return to the previous step. These operations can also be performed using the corresponding buttons on the TV's control panel. For more information, see page 22 of the manual.

How do I connect a soundbar or external audio system to the Sharp LC42D65U TV?

You can connect an external audio system to the TV using either the digital or analog audio output terminals:Digital Audio Output: Use the DIGITAL AUDIO OUTPUT terminal on the TV. This connects to the optical digital input of external audio devices using an Optical fiber cable. The audio can be output in PCM or Dolby Digital formats, which can be selected in the Audio Setup menu.Analog Audio Output: Use the AUDIO OUTPUT terminals (R-AUDIO-L) on the TV.

What is the safest method to clean the screen of my Sharp LC42D65U TV?

To safely clean the screen:Turn off the main power and unplug the AC cord from the wall outlet.For general cleaning, use a soft cloth and gently wipe the surface of the display panel.If the panel is very dirty, use a soft damp cloth to gently wipe it. Avoid wiping strongly, as it may scratch the surface.For dusty panels, an anti-static brush (commercially available) can be used.To protect the panel, do not use a dirty cloth, liquid cleaners, or chemical cloths, as these materials may damage the panel surface. For more information, see page 6 of the manual.

How do I update the firmware on my Sharp LC42D65U TV?

To update the firmware on your TV using a USB memory device:Insert the USB memory device with the update file into the SERVICE terminal on the TV.Press MENU to display the menu screen, then select "Digital Setup".Select "Software Update" using ▲/▼, then press ENTER.If prompted, input the 4-digit secret number using the 0-9 buttons.Press ENTER to start checking the data on the USB memory device.The TV will display the current software version and the update version. Select "Yes" to confirm the update and press ENTER.Press ENTER again to start the update process. The screen may go dark temporarily.Once the software is successfully updated, a message will indicate completion, and the TV will automatically turn off and then turn on again.After the completion screen is displayed, press ENTER. 1Remove the USB memory device.Important: Do not remove the USB memory device or unplug the AC cord while the software is being updated, as this can cause the update to fail.

Sharp LC42D65U Operation Manual

Sharp flat panel television user manual

Hide thumbs Also See for LC42D65U:

Installation manual (2 pages)

Service manual (114 pages)

Table Of Contents

Table of Contents

Quick Links

See also: Service Manual , Installation Manual

LC-42D65U

LC-46D65U

LC-52D65U

LIQUID CRYSTAL TELEVISION

TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA

DE CRISTAL LÍQUIDO

OPERATION MANUAL

MODE D'EMPLOI

MANUAL DE OPERACIÓN

IMPORTANT

: Please read this operation manual before starting operating the equipment.

IMPORTANT

: Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.

IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

Table of Contents

What should I do if my Sharp LC42D65U TV does not turn on?
If your Sharp LC42D65U TV does not turn on, follow these steps:
- Check if you pressed TV POWER on the remote control unit.
- If the POWER indicator on the TV does not light up, press POWER on the TV.
- Ensure the AC cord is connected.
- Verify that the power has been turned on.
- If the unit still does not power on, unplug the television from the outlet and repeat the installation steps.
- In cases of improper operation due to external influences such as lightning or static electricity, turn off the TV's power or unplug the AC cord and replug it in after 1 or 2 minutes.
Was this helpful?
How can I perform a factory reset on my Sharp LC42D65U TV?
To perform a factory reset:
1. On the screen, "Return to the factory preset values" will be displayed. If you have set a Secret No., input the 4-digit secret number.
2. When "Now, TV will restart automatically. OK?" displays, select "Yes".
3. When "Now initializing..." displays, select "Yes". The TV will then restart, and the screen will have returned to its original settings. Note that Channel Setup, Language, Secret number, and TV Location settings will not be changed.
For more information, see page 27 of the manual.
Was this helpful?
Why is there no sound coming from my Sharp LC42D65U TV?
If there is no sound coming from your TV:
- Check if the volume is too low and increase it if necessary.
- Verify that "Variable" is selected in the Output Select settings.
- Check if the MUTE button on the remote control unit has been pressed, and press it again to unmute if needed.
Was this helpful?
How can I troubleshoot common display problems on my Sharp LC42D65U TV?
To troubleshoot common display problems:
- If the picture is cut off or has sidebar screens:
  - Check if the image position is correct.
  - Ensure screen mode adjustments, such as picture size, are made correctly.
- If there is strange color, light color, or color misalignment:
  - Adjust the picture tone.
  - Consider if the room is too bright, which can make the picture appear dark.
  - Check the input signal setting.
For more information, see pages 20, 23, 26, 27 and 41 of the manual.
Was this helpful?
What should I do if the remote control for my Sharp LC42D65U TV stops responding?
If the remote control stops responding:
- Check if the FUNCTION setting on the remote control is set to the TV position.
- Verify that the batteries are inserted with correct polarity (+, - aligned).
- If the batteries are worn out, replace them with new ones.
- Ensure the remote control is not being used under strong or fluorescent lighting, or if a fluorescent light is illuminated near the remote control sensor on the TV. If so, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.
Was this helpful?
What are the available input ports on the Sharp LC42D65U TV?
The Sharp LC42D65U TV has the following input ports:
- INPUT 1: AV in (composite video) and Component in.
- INPUT 2: Component in and S-VIDEO in.
- INPUT 3: AV in (composite video).
- INPUT 4 (PC-IN): 15-pin mini D-sub female connector (RGB) and Audio in (Ø 3.5 mm jack).
- INPUT 5 (HDMI): HDMI in.
- INPUT 6 (HDMI): HDMI in and Audio in (Ø 3.5 mm jack).
- INPUT 7 (HDMI): HDMI in.
- INPUT 8 (HDMI): HDMI in.
- INPUT 9 (HDMI): HDMI in.
- ANT/CABLE: 75 Ω F Type for analog and digital TV signals.
For more information, see pages 12, 14, 15 and 43 of the manual.
Was this helpful?
How can I optimize the picture settings on my Sharp LC42D65U TV?
To optimize the picture settings:
1. Press MENU to display the menu screen, then select "Picture".
2. Select a specific adjustment item using ▲/▼.
3. Adjust the setting using ◄/► or ▲/▼, then press ENTER.
4. Press MENU to exit.
You can adjust the following settings in the Picture Menu:
- Backlight
- Contrast
- Brightness
- Color
- Tint
- Sharpness
For advanced picture settings, you can adjust:
- C.M.S. (Color Management System): Hue and Saturation.
- Color Temp. (Color Temperature): High, Mid-High, Middle, Mid-Low, Low, R Gain, G Gain, B Gain.
- Active Contrast: On or Off.
- I/P Setting: Fast or Slow.
- Film Mode (3:2 pull-down): On or Off.
- Digital Noise Reduction: Off, High, Middle, or Low.
- 3D-Y/C: Slow, Standard, Fast, or Off.
- Monochrome: On or Off.
- Range of OPC: Adjusts the brightness level range of the OPC sensor's automatic adjustments.
For more information, see pages 21, 22, 23 and 24 of the manual.
Was this helpful?
How do I access and use the on-screen menu for the Sharp LC42D65U TV?
To access and use the on-screen menu:
- Press the MENU button on the remote control to open or close the menu screen.
- Use the ▲/▼ buttons to select the desired item.
- Use the ◄/► buttons to adjust the item.
- Press ENTER to go to the next step or complete the setting.
- Press RETURN to return to the previous step. These operations can also be performed using the corresponding buttons on the TV's control panel.
For more information, see page 22 of the manual.
Was this helpful?
How do I connect a soundbar or external audio system to the Sharp LC42D65U TV?
You can connect an external audio system to the TV using either the digital or analog audio output terminals:
- Digital Audio Output: Use the DIGITAL AUDIO OUTPUT terminal on the TV. This connects to the optical digital input of external audio devices using an Optical fiber cable. The audio can be output in PCM or Dolby Digital formats, which can be selected in the Audio Setup menu.
- Analog Audio Output: Use the AUDIO OUTPUT terminals (R-AUDIO-L) on the TV.
Was this helpful?
What is the safest method to clean the screen of my Sharp LC42D65U TV?
To safely clean the screen:
- Turn off the main power and unplug the AC cord from the wall outlet.
- For general cleaning, use a soft cloth and gently wipe the surface of the display panel.
- If the panel is very dirty, use a soft damp cloth to gently wipe it. Avoid wiping strongly, as it may scratch the surface.
- For dusty panels, an anti-static brush (commercially available) can be used.
- To protect the panel, do not use a dirty cloth, liquid cleaners, or chemical cloths, as these materials may damage the panel surface.
For more information, see page 6 of the manual.
Was this helpful?
How do I update the firmware on my Sharp LC42D65U TV?
To update the firmware on your TV using a USB memory device:
1. Insert the USB memory device with the update file into the SERVICE terminal on the TV.
2. Press MENU to display the menu screen, then select "Digital Setup".
3. Select "Software Update" using ▲/▼, then press ENTER.
4. If prompted, input the 4-digit secret number using the 0-9 buttons.
5. Press ENTER to start checking the data on the USB memory device.
6. The TV will display the current software version and the update version. Select "Yes" to confirm the update and press ENTER.
7. Press ENTER again to start the update process. The screen may go dark temporarily.
8. Once the software is successfully updated, a message will indicate completion, and the TV will automatically turn off and then turn on again.
9. After the completion screen is displayed, press ENTER. 1
10. Remove the USB memory device.
Important: Do not remove the USB memory device or unplug the AC cord while the software is being updated, as this can cause the update to fail.
Was this helpful?

Need help?

Do you have a question about the LC42D65U and is the answer not in the manual?

Questions and answers

Dave Moody

April 17, 2025

How do I get to the color and pride adjustment without a remote

1 comments:

Mr. Anderson

May 9, 2025

To access the color and picture adjustment settings on a Sharp LC42D65U without a remote, use the physical buttons on the TV:

1. Use the CHr/s (Channel up/down) buttons to move the cursor up or down.
2. Use the VOLk/l (Volume left/right) buttons to move the cursor left or right and to adjust settings.
3. Press ENTER to select or confirm a setting.
4. Press RETURN to go back to the previous menu.

These buttons allow navigation and adjustment of picture settings such as backlight and contrast through the on-screen display menu.

This answer is automatically generated

Summary of Contents for Sharp LC42D65U

Page 1 LC-42D65U LC-46D65U LC-52D65U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
Page 3: Important Information
LIQUID CRYSTAL TELEVISION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Page 4: Trademarks
DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-42D65U/LC-46D65U/LC-52D65U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 5: Dear Sharp Customer
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
Page 6 IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,...
Page 7: Child Safety
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: TUNE INTO SAFETY • One size does NOT ﬁ t all. Follow the manufacturer’s recommendations for the safe installation and use of your ﬂ...
Page 8: Supplied Accessories
6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.
Page 9: Quick Installation Tips
POWER on the remote control to turn the power on. IMPORTANT: POWER IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Remote control sensor 30º 30º 30º 30º...
Page 10: Preparation
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
Page 11: Table Of Contents
Contents IMPORTANT INFORMATION ...1 Trademarks ...2 DEAR SHARP CUSTOMER ...3 IMPORTANT SAFETY INSTRUCTIONS ...3 Supplied Accessories...6 QUICK REFERENCE ...6 Attaching the Stand ...6 QUICK INSTALLATION TIPS ...7 Using the Remote Control Unit ...7 Preparation ...8 Antennas ...8 Installing Batteries in the Remote Control Unit ...8 Contents ...9...
Page 12: Part Names
Part Names TV (Front) * OPC: Optical Picture Control TV (Rear/Side) POWER button MENU button INPUT button Channel buttons Volume buttons (VOL / ) INPUT 5 terminal (HDMI) INPUT 3 terminals SERVICE terminal *1 See pages 12 and 13 for external equipment connection. *2 See page 20 for button operations.
Page 13: Remote Control Unit
Part Names Remote Control Unit • When using the remote control unit, point it at the TV. TV POWER: Switch the TV power on or enters standby. (See page 14.) DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off.
Page 14: Connecting To External Equipment
Connecting to External Equipment You can connect many types of external equipment to your TV like a Blu-ray disc player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV.
Page 15: Connecting Pc
Connecting to External Equipment Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio outputs from the terminal. To optical digital input of external audio devices • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection.
Page 16: Watching Tv
Watching TV Turning On/Off the Power POWER TV POWER (On/Standby) Initial Setup When you turn on the TV for the ﬁ rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press TV POWER on the remote control unit.
Page 17: Direct Button Operation
Direct Button Operation Changing Channels You can change channels by pressing CH • (DOT). Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENT. To select a 3-digit channel number (e. g., Channel 115): Press 1 ENT.
Page 18: Av Mode
Direct Button Operation AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.
Page 19: Power Saving
Direct Button Operation POWER SAVING Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING. Each time you press POWER SAVING, the mode changes • as shown below. Standard Advanced •...
Page 20: View Mode
Direct Button Operation VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. •...
Page 21: On-Screen Display Menu
On-Screen Display Menu Menu Items For TV/INPUT 1/2/3 Mode Picture Menu OPC ... Page 21 Backlight ... Page 21 Contrast ... Page 21 Brightness ... Page 21 Color ... Page 21 Tint ... Page 21 Sharpness ... Page 21 Advanced C.M.S.-Hue ...
Page 22: On-Screen Display Menu Operation
On-Screen Display Menu On-Screen Display Menu Operation Example Picture [b12] a16 Backlight Contrast [b30] Brightness Color Tint [ b2] Sharpness Advanced Reset : Select ENTER : Enter RETURN : Back The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.
Page 23: Picture Menu
On-Screen Display Menu Picture Menu Adjusts the picture to your preference with the following picture settings. Example Picture [b12] a16 Backlight Contrast [b30] Brightness Color Tint [ b2] Sharpness Advanced Reset Press MENU to display the MENU screen, and then press c/d to select "Picture".
Page 24: Audio Menu
On-Screen Display Menu Film Mode (3:2 pull-down) Automatically detects a ﬁ lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still ﬁ lm frame for high-deﬁ nition picture quality. On: Detects, analyzes, converts ﬁ lm source. Off: Normal viewing mode. •...
Page 25: Power Control Menu
On-Screen Display Menu Power Control Menu Power control setting allows you to save energy. Example Power Control [Off] Power Saving [Disable] No Signal Off [Disable] No Operation Off Press MENU to display the MENU screen, and then press c/d to select "Power Control". Press a/b to select a "No Signal Off"...
Page 26: Ch Setup
On-Screen Display Menu CH Setup If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
Page 27: Position
On-Screen Display Menu Position For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. • For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER.
Page 28 On-Screen Display Menu ■ MPAA (Voluntary movie rating system) ■ MPAA (Voluntary movie rating system) Example Example MPAA MPAA TV Guidelines TV Guidelines Can. English Ratings Can. English Ratings Can. French Ratings Can. French Ratings Press a/b to adjust the item to your desired position. Press a/b to adjust the item to your desired position.
Page 29 On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Page 30: Option Menu
On-Screen Display Menu Option Menu Example Option AQUOS LINK Setup Audio Only [Input 4 (PC)] PC Audio Select Output Select [Fixed] Caption Setup Digital Caption Info. Program Title Display [No] Favorite CH Game Play Time [Off] [Off] Operation Lock Out Demo Mode Press MENU to display the MENU screen, and then press c/d to select "Option".
Page 31: Output Select
On-Screen Display Menu Output Select Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOLk/l on the remote control unit or VOLk/l on the TV. Sound via the AUDIO OUTPUT terminal is not adjustable and outputs at a consistent level.
Page 32: Digital Setup Menu
USB memory device with the update ﬁ le into the SERVICE terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277). CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated.
Page 33 On-Screen Display Menu Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update ﬁle. During the data checking, “ Checking Now checking the data in the USB memory device. Checking •...
Page 34: Other Viewing Options
Other Viewing Options Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. Presetting manufacturer codes Press FUNCTION until the LED for your device lights up.
Page 35 Other Viewing Options Manufacturer codes REMOTE CONTROL CODE VCR BRAND DVD/BD/LD BRAND NUMBER CATV/SAT BRAND • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER...
Page 36: Using Aquos Link
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray Disc equipment, AV ampliﬁ er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certiﬁ ed cables to the TV, you can control a recorder or AV ampliﬁ...
Page 37: Aquos Link Setup
Using AQUOS LINK AQUOS LINK Setup Press MENU to display the MENU screen, and then press c/d to select "Option". Press a/b to select “AQUOS LINK Setup”, and then Press ENTER. Press a/b to select a speciﬁ c item, and then press ENTER.
Page 38: One Touch Playback
Using AQUOS LINK One Touch Playback AQUOS LINK allows you to operate the HDMI- connected equipment with one remote control. Press d to start playing back a title. • The last played program is played back. You can use the following buttons during broadcast viewing.
Page 39: Playback Of Titles Using Aquos Link
Using AQUOS LINK Playback of Titles Using AQUOS LINK This section explains how to play back a title in the AQUOS LINK-compatible equipment. Power on the AQUOS LINK-compatible equipment, and select appropriate external input. Press OPTION to display the AQUOS LINK MENU screen.
Page 40: Appendix
Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Page 41: Troubleshooting
Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color, light color, or color misalignment • Power is suddenly turned off. • No picture •...
Page 42: Rs-232C Port Speciﬁ Cations
Appendix RS-232C Port Speciﬁ cations ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers. ■...
Page 43: Speciﬁ Cations
The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production units.
Page 44: Pc Compatibility Chart
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
Page 45: Product
WHICH VARY FROM STATE TO STATE. The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted.
Page 47: Dimensional Drawings
Dimensional Drawings LC-42D65U LC-46D65U (1020) (933.2) (400) 1113) 1023.4) 400) Unit: inch (mm) (550) (122) (100) (325) 550) 119) 325)
Page 48 Dimensional Drawings LC-52D65U (1252) (1157) (400) Unit: inch (mm) (550) (123) (96) (325)
Page 49 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-D779WJN1 08P09-MX-NM...

This manual is also suitable for:

Lc46d65u Lc52d65u Lc42d85u - lc - 42" lcd tv Lc46d85u - lc - 46" lcd tv Lc-52d85u Aquos lc46d85u ... Show all

Sharp LC42D65U Operation Manual

Important Information

Trademarks

Dear Sharp Customer

Important Safety Instructions

Supplied Accessories

Quick Reference

Preparation

Contents

Part Names

Connecting to External Equipment

Watching TV

Direct Button Operation

On-Screen Display Menu

Other Viewing Options

Using AQUOS LINK

Appendix

Calling for Service

Limited Warranty

Dimensional Drawings

Quick Links

Frequently Asked Questions (11)

Need help?

Questions and answers

Related Manuals for Sharp LC42D65U

Summary of Contents for Sharp LC42D65U

This manual is also suitable for:

Table of Contents