How To Temporarily Release The V-Chip Block; Reactivating The Temporarily Released V-Chip Block; Digital Setup; Audio Setup - Sharp LC-32GP3U-W Operation Manual

Useful adjustment settings
How to temporarily release the
V-CHIP BLOCK
When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
Press ENTER while the V-CHIP is working,
1
and then the secret number setting menu
displays.
Input the 4-digit secret number by using 0–
2
9. At this time V-CHIP BLOCK temporarily
releases.
Reactivating the temporarily
released V-CHIP BLOCK
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Method 1:
Select "Status" setting from the Parental CTRL menu
to reactivate BLOCK. (See page 43.)
Method 2:
Select "V-Chip" setting ("MPAA", "TV Guidelines",
"Can. English Ratings" or "Can. French Ratings")
from the Parental CTRL to reactivate BLOCK. (See
pages 46 and 49.)
Method 3:
Switch off the TV power.
NOTE
• Performing any of the three above will activate the V-CHIP
BLOCK.

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen, and
1
then press c/d to select "Digital Setup".
Press a/b to select "Audio Setup", and then
2
press ENTER.
Press a/b to select "PCM" or "Dolby Digital",
3
and then press ENTER.
PCM
Dolby Digital
Selected item
PCM The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select "PCM".
Dolby Digital The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.
Press MENU to exit.
4
Identifi cation
Press MENU to display the MENU screen, and
1
then press c/d to select "Digital Setup".
Press a/b to select "Identifi cation", and then
2
press ENTER.
The current version of the TV software is
displayed.
Description
49