Download  Print this page

Important Hints; Trouble Shooting - Whirlpool WSI24ABBPH00 Service Manual

Wall monted compact electric dryer 220v / 60hz
Hide thumbs

Advertisement

12 – IMPORTANT HINTS:
For your own safety, disconnect the appliance from the mains outlet before working on it.
Do not forget to discharge the Capacitor before any maintenance work on the Motor.
Be careful when working on the appliance, as there are some sharp-edged metallic
parts.
13 – TROUBLE SHOOTING:
TROUBLE
Dryer does not work / does
not turn on
Noise
The Dryer does not dry the
clothes
Lint Filter cleaning light is lit
MSEX0110i – Wall Mounted Dryer WSI24ABBPH00
POSSIBLE CAUSE
Start/Off button is not pushed
Lack of electric power
Door is open
The plug is not connected to mains
Mains failure (bad contact)
Defective outlet
Hairpins, pins or other objects may
be in the Dryer with the clothes
Clothes volume exceeded Dryer
capacity
Clothes load is inadequate for the
selected cycle
Drying
time
is
clothes volume
Program is inadequate for clothes
type
The clothes have not been spun or
wrung out
Lint Screen is dirty
Security thermostat is open
Lint Screen is dirty
Hot air exhaust vent is clogged
SOLUTION
Push the Start/Off button.
Wait until power returns.
Close the door (the Micro
Switch prevents the Dryer
from working with the door
open).
Connect the plug to the outlet.
Check outlet operation with
other appliance.
Fix the outlet.
Remove the objects from the
Dryer.
Remove excess of clothes.
Select another drying cycle,
according to clothes type.
inadequate
for
Select drying time according
to clothes volume.
Refer to program table.
Spin
Washer or wring them out to
remove as much as water as
possible before placing them
in the Dryer.
Clean the Lint Screen.
Test continuity in thermostat.
Clean the Lint Screen.
Check and remove clog from
hot air exhaust vent.
the
clothes
in
Page 20 -21
the

Advertisement

loading

  Related Manuals for Whirlpool WSI24ABBPH00