Table of Contents
Advertisement
10.8 – Timer:
The Timer controls the clothes drying time up to 180 minutes. It can be found in the Instrument Support, in the
right side of Dryer.
To test the Timer, check continuity between its terminals with a Multimeter, according to the table below:
ACTIVATED
COMPONENT
Motor Timer
Heater
Dryer Motor Anti-
clockwise direction
Dryer Motor –
Clockwise direction
11 – NECESSARY TOOLS:
- Socket Wrench Set;
- Phillips Screwdriver Set;
- Flat-blade Screwdriver Set;
- Open-ended Wrench Set;
- Nose Pliers;
- Analog or Digital Multimeter;
- Gloves (for protection purposes);
- Cleaning cloth.
MSEX0110i – Wall Mounted Dryer WSI24ABBPH00
CONTACT
continuity between
terminals 4T & 4C
continuity between
terminals 3B & 3C
continuity between
terminals 36B & 36C
Continuity between leads
36T & 36C
TERMINALS
TIMER
OCCURRENCE
During all cycle (180 minutes).
During all cycle, except for the last 10 minutes of
any selected program (Softening Cycle).
During the drying period of clothes. Occurs 35
times in a full programming during 5 seconds and
repeats every 5 minutes and 11 seconds.
During the Anti-Wrinkle System period. Occurs
34 times in a full programming during 5 seconds
and repeats every 5 minutes and 11 seconds.
TIMER
Page 19 -21
Advertisement
Table of Contents
