SMC Networks EX260 Series Operation Manual page 6

■NOTE
○Follow the instructions given below when designing, selecting and handling the product.
The instructions on design and selection
described below must also be followed.
maintenance, etc.)
Product specifications
•When conformity to UL is required, the SI unit should be used with a UL1310 Class 2 power supply.
•The SI unit is a UL approved product only if they have a
•Use the specified voltage.
Otherwise failure or malfunction can result.
•Reserve a space for maintenance.
Allow sufficient space for maintenance when designing the system.
•Do not remove any nameplates or labels.
This can lead to incorrect maintenance, or misreading of the operation manual, which could cause damage or
malfunction to the product.
It may also result in non-conformity to safety standards.
(installation, wiring, environment, adjustment, operation,
mark on the body.
-5-
No.EX※※-OMP0005-E