Film Mode (3:2 Pull-Down); Y/C; Monochrome; Range Of Opc - Sharp Aquos LC 65D64U Operation Manual

Basic adjustment settings

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.
Selected item
On Detects, analyzes, converts fi lm source
Off Normal viewing mode
NOTE
• "Film Mode" does not function when you set the "AV
Mode" to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Slow For still images
Standard Normal adjustment
Fast For moving images
Off (2D) For Game Mode
NOTE
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.
Selected item
On For viewing in monochrome
Off Normal color

Range of OPC

The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e16 and a minimum of f16.
Selected item
f15 through e16
Max.
f16 through e15
Min.
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
28
Description
Description
Description
Description

Sound adjustment

You can adjust the sound quality to your preference
with the following settings.
Press MENU to display the MENU screen, and
1
then press c/d to select "Audio".
Audio
a15
Treble [ 0]
a15
Bass [ 0]
Balance [ 0]
Surround
Bass Enhancer
Reset
Press a/b to select a specifi c adjustment
2
item.
Press c/d to adjust the item to the desired
3
level.
cbutton
Selected item
Treble For weaker treble
Bass For weaker bass
Balance Decrease audio from
the right speaker
Press MENU to exit.
4
NOTE
• Audio menu is grayed out when Output Select is set to
"Variable".
• For resetting all Audio adjustment items to the factory
preset values, press a/b to select "Reset", press ENTER,
press c/d to select "Yes", and then press ENTER.
Power Control
b15
b15
L R
[Off]
[On]
dbutton
For stronger treble
For stronger bass
Decrease audio
from the left
speaker