Reference Documents - Honeywell LCBS Connect Quick Start Manuals

Wall Module
The LCBS Connect wall module is a full color, touchscreen interface that is exclusively com-
patible with the LCBS Connect controller. The graphic-rich display allows for full configuration
of the LCBS controller using an intuitive, menu-driven method.
Thermostat
Date & time
The wall module gets both its power and communication from the LCBS controller through
the Sylk bus. In order to correctly wire the wall module, the front cover needs to be removed
to expose the two terminal pins. After replacing an existing thermostat with the new LCBS
wall module, consider using the wall plate, 50028399-001, to cover up any previously used
mounting holes.
WARNING! Directly applying 24Vac to the wall module may cause damage to the device.

Reference Documents

• LCBS Connect Wall Module Installation Instructions (31-00084)
• LCBS Connect Gateway Installation Instructions (31-00081)
• LCBS Connect Application Manual (31-00118)
By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising
out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and
subsidiaries, from and against any liability, cost, or damages, including attorneys' fees, arising out of, or
resulting from, any modification to the literature by you.
Home and Building Technologies
715 Peachtree Street NE
Atlanta, GA 30308
customer.honeywell.com
Thermostat Name Menu
Indoor Humidity
72°
45%
Fan
On
System
Cool Mode
72°
Running Schedule
Occupied
Menu
Schedule and Holidays
System Status
Contractor Information
Con guration
® U.S. Registered Trademark.
© 2017 Honeywell International Inc.
31-00115EFS—01 M.S. 10-17
Printed in U.S.A.
Home
MCR36692